| 7 SCI,
8 Scopus,
1 IEEE Explore,
6 Peer Reviewed International Journals,
1 Patent and
5 Book Chapters in Taylor & Francis & Springer Nature. |
| 1. Pranav Ravindrannair, Azhar Equbal, Md Asif Equbal, Kuldeep K. Saxena and Md. Israr Equbal,”Grey Based Taguchi Method for Multi-response Optimization of FSW of Aluminium AA 6061 Alloy” International Journal of Interactive Design and Manufacturing (IJIDeM), 2023.
https://doi.org/10.1007/s12008-023-01557-5 (SCI). |
| 2. Jai Prakash, Azhar Equbal, Pranav Ravindrannair, Md Asif Equbal and Md. Israr Equbal, “Optimizing The Machining Parameters During Turning Of EN 31 Steel Using Tin + Al2O3
+ Ticn Coated Tungsten Carbide Tool” Materials Today: Proceedings, pp. 1-6, 2023. https://doi.org/10.1016/j.matpr.2023.04.473 (Scopus). |
| 3. Azhar Equbal, Md Asif Equbal, Md. IsrarEqubal, Pranav Ravindrannair, Zahia A. Khan, Irfan Anjum Badruddin,Sarfaraz Kamangar, Vineet Tirth, Syed Javed and M.I.Kittur, “Evaluating CNC Milling Performance For Machining AISI 316 Stainless Steel With Carbide Cutting Tool Insert”, Materials, vol. 15(22), pp. 1-15, 2022.
https://doi.org/10.3390/ma15228051 (SCI). |
| 4. Azhar Equbal, Mohammad Ali, Md Asif Equbal, S.C.Srivastava, Zahia A. Khan and Md. IsrarEqubal, “Characteristics Of Conventional And Microwave Sintered Iron Ore Preform”
Materials, vol. 15(7), pp. 1-16, 2022. https://doi.org/10.3390/ma15072655 (SCI). |
| 5. Azhar Equbal, Md Asif Equbal, Zahid A. Khan, Irfan Anjum Badruddin, Mohamed Bashir Ali Bashir and Hussein Alrobei, “Investigating The Dimensional Accuracy Of The Cavity
Produced By ABS P400 Polymer-Based Novel EDM Electrode” Polymers, vol. 13(23), pp. 1-14, 2021.
https://doi.org/10.3390/polym13234109 (SCI) |
| 6. Md Asif Equbal, Azhar Equbal, Archana Kumari and Rajkumar Ohdar,“A Comprehensive Model For Supply Chain Performance Measurement: Application In The Coal Beneficiation Plant Of Steel Manufacturing Company” Industrial Engineering and Engineering Management (IEEM), IEEE Xplore, pp. 1401-1406, 2018.
https://doi.org/10.1109/IEEM.2017.8290123 (IEEE Xplore/ScOPUS). |
| 7. Azhar Equbal, Md Asif Equbal, Anoop Kumar Sood, R Pranav and Md Israr Equbal,”A Review And Reflection On Part Quality Improvement Of Fused Deposition Modelled Parts” IOP Conference Series: Materials Science and Engineering 455 (2018).
https://doi.org/10.1088/1757-899X/455/1/012072 (Scopus). |
| 8. Md Israr Equbal, Azhar Equbal, Md Asif Equbal, and R Pranav “Optimization Of Forging Parameters Of 35c8 Steel Using Grey Relational Analysis” International Journal of Microstructure and Materials Properties, vol. 13(3/4), pp. 198-212, 2018.
https://doi.org/10.1504/IJMMP.2018.096144 (Scopus). |
| 9. Md. Asif Equbal and Rajkumar Ohdar, “A Comprehensive Supply Chain Performance Measurement And Evaluation (CSPME) Methodology” International Journal of Mechanical
and Production Engineering Research and Development, vol. 7(2), pp. 1-18, 2017.
Paper id : IJMPERDAPR20171 (Scopus). |
| 10. Azhar Equbal, Md Israr Equbal, Anoop Kumar Sood and Md Asif Equbal, “A Comparative Study On Electroplating Of FDM Parts” International Journal of Technology, vol. 8 (5), pp. 930- 938, 2017.
https://doi.org/10.14716/ijtech.v8i5.875 (SCI). |
| 11. Azhar equbal, Anoop Kumar Sood, Abdul Razzaq Ansari and Md. Asif Equbal, “Optimization Of Process Parameters Of FDM Part For Minimizing Its Dimensional Inaccuracy” International Journal of Mechanical and Production Engineering Research and Development, vol. 7(2), pp. 57-66, 2017.
Paper id : IJMPERDAPR20176 (Scopus). |
| 12. Md. Asif Equbal and Rajkumar Ohdar, “Supply Chain Performance Measurement: A Review And Reflection” Applied Mechanics And Materials, Trans Tech Publications, Switzerland,
vol. 813-814, pp.1208-1216, 2015.
https://doi.org/10.4028/www.scientific.net/AMM.813-814.1208 (Scopus). |
| 13. Anoop Kumar Sood, Md. Asif Equbal, Vijay Toppo, R K Ohdar and S S Mahapatra, “An Investigation On Sliding Wear Of FDM Built Parts” CIRP Journal of Manufacturing Science and Technology, vol. 5(1), pp. 48-54, 2012.
https://doi.org/10.1016/j.cirpj.2011.08.003 (Sci). |
| 14. Md. Asif Equbal, Anoop Kumar Sood, R K Ohdar and S S Mahapatra, “Prediction Of Dimensional Accuracy In Fused Deposition Modeling (FDM): A Fuzzy Logic Approach” International Journal of Productivity and Quality Management, vol. 7(1), pp. 22-43, 2011.
https://doi.org/10.1504/IJPQM.2011.03773, (Scopus). |
| 15. Md. Asif Equbal, Anoop Kumar Sood, R K Ohdar and S S Mahapatra, “Prediction And Analysis Of Sliding Wear Performance Of Fused Deposition Modeling (FDM) Processed
ABS Parts” Proceeding of Institute of Engineers Part J., Journal of Engineering Tribology, vol. 224(12), pp. 1261-1271, 2010.
https://doi.org/10.1243/13506501JET835 (Sci). |
| 16. Anish Kumar, Md Asif Equbal, Bateshwar Prasad and Mukesh Kumar Sahu, “Analysis Of The Crack In Thick Pressure Vessel” International Journal of Technology and Engineering
Sciences (IJTES), vol. 3(1), pp. 24-30, 2023. |
| 17. Azhar Equbal, Shahid Akhtar and Md Asif Equbal, “A Reflection on the Use of Additive Manufacturing in Nephrology for Education and Surgical Planning” Apollo Medicine, vol. 17(4), pp. 264-266, 2020.
DOI:10.4103/am.am_101_20 (Peer Reviewed). |
| 18. Md Israr Equbal, Azhar Equbal, Md Asif Equbal, and Rajkumar Ohdar, “Effect of temperature and strain rate of the hot deformation of V micro alloyed steel on flow stress”
International Journal of Materials Forming and Machining Processes (IJMFMP), vol. 6(1), pp. 40-52, 2019.
https://doi.org/10.4018/IJMFMP.2019010103 (Peer Reviewed). |
| 19. Azhar Equbal, Md. Asif Equbal and Anoop Kumar Sood, “Electroplating of FDM Parts: A comparison via two different routes” Advanced material proceedings, vol. 2 (7), pp. 414-
419, 2017.
https://doi.org/10.5185/amp.2017/702 (Peer Reviewed). |
| 20. Azhar Equbal, Anoop Kumar Sood, Md. Asif Equbal and Md. Israr Equbal, “An Investigation on material removal rate of EDM process: A Response surface methodology approach” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 11(4), pp. 845-850, 2017.
https:// doi.org/10.5281/zenodo.1130985 (Peer Reviewed). |
| 21. Md. Asif Equbal and Rajkumar Ohdar, “Supplier Selection and Evaluation of Supplier Link in Supply Chain Management” International Journal of Management and Applied Science,
vol. 2(11), pp. 6-10, 2016.
https://iraj.doionline.org/dx/IJMAS-IRAJ-DOIONLINE-6252 (Peer Reviewed). |
| 22. Azhar Equbal, Md. Asif Equbal and Anoop Kumar Sood, “Metallization on FDM processed parts using electroless procedure” Procedia of Material science, Elsevier publication, vol. 6, pp. 1197-1206, 2014.
https://doi.org/10.1016/j.mspro.2014.07.193 (Peer Reviewed) |
| 5 BOOK Chapters |
| 1. Azhar Equbal, Md Asif Equbal, Wearing Behaviour of Electrodes during EDM of AISI 1035 Steel, pp. 101-112, Chapter 5 in Advanced Manufacturing Methods Smart Processes and Modeling for Optimization (2022), CRC Press, Taylor & Francis Group Boca Raton, London, New York.
https://doi.org/10.1201/9780367822385
ISBN: 978-0-367-37089-3 (hbk). |
| 2. Azhar Equbal, Shahid Akhtar, Md Asif Equbal and Anoop Kumar Sood, Application of Machine Learning in Fused Deposition Modeling: A Review, pp. 445-463, Chapter 22 in
Materials Forming, Machining and Tribology, Fused Deposition Modeling Based 3D Printing(2021), Springer, Nature, Switzerland.
https://doi.org/10.1007/978-3-030-68024-4
ISSN 2195-0911
ISSN 2195-0911 |
| 3. Azhar Equbal, Md Asif Equbal, Md Israr Equbal and Anoop Kumar Sood, Multi-Criteria Decision Method for Roughness Optimization of Fused Deposition Modelled Parts, pp.
235-262, Chapter 12 in Additive Manufacturing Technologies From an Optimization Perspective (2019), IGI Global, International Publisher of Information Science and Technology Research.
ISBN13: 9781522591672
EISBN13: 9781522591696) |
| 4. Azhar Equbal, Md Asif Equbal and Md Israr Equbal, An Insight On Current And Imminent Research Issues In EDM, pp. 33-54, Chapter 2 in Non-Conventional Machining in Modern Manufacturing Systems (2019), IGI Global, International Publisher of Information Science and Technology Research.
ISBN13: 9781522561613
EISBN13: 9781522561620 |
| 5. Azhar Equbal, Md Asif Equbal and Md Israr Equbal, Optimization Techniques In Electric Discharge Machining Process, pp. 269-280, Chapter 14 in Industrial Engineering and
management practices (2017), (International Edition), Editor: Dr. Ashok G. Matani, International Research Publication House, Delhi, India.
ISBN 978-93-84443-56-6 |
| Patent and Design Registration |
| Patent granted for Automated Medical Instrument Sterilization Device (Design Number 6326126 under GOV.UK) on 14.11.2023.
(Mohamed Shafiullah Hussain Valiallah, Azhar Equbal, Dr. Mohammad Asif Equbal, Mohamed Khaleefullah Mohamed Valiallah) |
